Click image to view full size image
Precision ball bearings and the patented fiber brush design allow operation up to 6,000 rpm. Fiber brush technology offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates. In addition, fiber brushes do not require lubrication and produce virtually no wear debris
Options
◆ No. of circuits
◆ Wire length
◆ Operation speed, current &voltage
◆ Flange mounting
◆ Protection level (dust and water)
◆ Connector
◆ Signal,power and data transmitted or
◆ Housing material
◆ combination transmitted
◆ Inner diameter
◆ Housing color
◆ Position of wire outlet
Electrical Parameters
| Circuit | 6 rings |
| Rated Voltage | 380VAC/240VDC |
| Rated Current | 2A/5A/10A/15A |
| Dielectric Strength | 1000VAC@50Hz,60s between each circuit |
| Insulation Resistance | 1000MΩ/500VDC |
| Electrical Noise | ＜0.01Ω |
| Lead length | Standard 250mm |
Machinery Technology Parameter
| Operating Speed | 0-5,000rpm |
| Working Temperature | -20℃ - +80℃ |
| Working Humidity | 75%RH or higher |
| Contact Material | Precious Metal |
| Bearing | Steel ball bearings |
| Structure Material | Engineering Plastic or metal |
| Torque | 0.1N/m for 6 rings, 0.03N/m increased for every 6 rings added |
| IP Rating | IP 54 |
| Operational life | ≥200 million cycles(Depends upon working temperature,rotating speed, environment and continuous working time) |
Outline dimesion unit
E-mail: 